Complete Guide to Troubleshoot your Internet Connection

Are you fed up for your internet connectivity? Are you looking for some effective and useful method to troubleshoot your internet connection or looking for an netgear extender app for easy setup? Then your search ends here, you have arrived at the right post. In this article, we will provide you with some useful tips to troubleshoot your internet connection and some valuable steps for NETGEAR Extender Login.

Troubleshoot your Internet Connection

1. Make Sure that you are Getting the Power

The main reason that causes poor internet connection is the ‘power’. Maybe you forget to turn the power on of your device. Make sure that all your WiFi devices are properly plugged into an electric wall socket. If you are facing the same issue again and again, consider unplugging your device, wait for five minutes and then plug it back again.

Remember, the process of NETGEAR Extender Setup couldn’t be completed I you have the poor internet connection or lost mywifiext.net password.

2. Check the Internet Connection Status of your Devices 

Make sure that both router and the modem are physically and properly connected with each other. Consider checking your modem first and after that the router. If you don’t see any power lights, place them to a different place.

Still facing the same issue? Ok, unplug both the devices for ten minutes and release all the cables. Unite all the cable systematically and then plug them back again. You will see that the LED lights on your devices start blinking.

3. Change the Channel Number on your Device

Interference of third-party WiFi devices that carry the same frequency as of router would be a big reason for mywifiext.net login using the password you have and poor internet connectivity issues.

Routers use one of the 14 frequencies/ channels to send and receive data over the commonly used 2.4GHz band. Various channels may overlap, but 1, 6, and 11 do not. If you detect that your WiFi connection is spotty, it means that you are experiencing interference of the unidentified channel. If your channel number is set as default, consider changing it at once. Interference of third-party channels will never allow you to access mywifiext.net local.

Ask us any time if you are still experiencing the same issues.

4. Reset your Router Internet Connection

If you have gone through the above -given process and didn’t get the solution, then try resetting your device to factory default settings and perform the initial and fresh settings. Fresh the factory reset hole with the help a paper clip or 30 seconds, once done release it.

5. Use the Latest Firmware of Technology

Making use of the old and outdated firmware of technology would be a big reason behind slow and poor internet connection. Make sure that the firmware of devices (router and the modem) you are using are up-to-date. This will help you a lot in resolving the performance of your internet.

Read more- 5 Handy Tips for Extending a Wireless Network

6. You might need a Range Extender

Range extender would be the best solution for your internet connectivity issues. The smart device (range extender) helps in spreading the range of the existing WiFi network to even those areas that are declared as dead zones. For New Extender Setup, what you have to do:

• Make use of an Ethernet cable and connect it with the latest firmware of router.
• Plug both the devices and wait for the power LED lights start blinking.
• When you see the blinking lights, connect your computer with the range extender and pull up a web browser of your choice onto it.
• Once your web browser is open, you can now type mywifiext into the field of its address bar.
• After that, you will be prompt to enter the default series of username and password that can easily found on NETGEAR WiFi Range Extender Manual steps.

Mywifiext.net is the local web address used to open the smart settings of NETGEAR Genie Setup for configuration of a range extender.

Note: If mywifiext doesn’t work, you can try using these:

• www.mywifiext.net
• 192.168.1.250 the default IP address of the range extender

You can also use Netgear extender app to log in to your Netgear device.